Air Filters Newfoundland and Labrador

Serving the Island & Labrador

Furnace, heat pump, HRV and commercial HVAC filters for homes and businesses from the Avalon to Labrador West – manufactured in Brampton, Ontario and shipped across the province. In the capital? Visit our St. John's page.

  • ✓ Made in Canada
  • ✓ Custom sizes
  • ✓ MERV 8 · 11 · 13
  • ✓ No customs or duties
Delivery to Newfoundland and Labrador$45 flat rate
Typical delivery3–9 business days
Made & shipped fromBrampton, Ontario
Snow-covered family home in winter with warm light glowing in the windows

Air quality in Newfoundland and Labrador

  • Fog, rain & damp homes
  • Mould & dust mites
  • Wood stove smoke
  • Wildfire smoke
  • Mining & industrial dust
  • Salt spray

Newfoundland and Labrador's outdoor air is generally clean – Atlantic winds sweep most pollution out to sea. The province's biggest indoor air challenge is moisture. Fog, drizzle and long, wet springs are part of life on the Island, especially along the Avalon and south coasts, and many older homes and outport houses have damp crawl spaces or basements where mould and dust mites thrive. When the air handler or HRV runs, those spores and allergens travel through the whole house.

Heating smoke is the second factor. Wood stoves remain common in rural Newfoundland and in Labrador, and on cold, still nights smoke can hang over communities in valleys and sheltered bays. Industry is concentrated in a few places: iron ore mining in Labrador City and Wabush, nickel processing at Long Harbour and mining at Voisey's Bay, the pulp and paper mill in Corner Brook, fish plants around the coast and the refinery at Come By Chance. Nearby residents can see dust and odour from these operations.

Wildfire smoke has become a growing concern. Recent summers have brought serious fires to Labrador – including evacuations of Labrador West and Churchill Falls communities – and fires on the Island itself, while smoke from Quebec and the rest of Canada has drifted over the province several times. Fine smoke particles (PM2.5) pass straight through basic fibreglass filters, so a pleated MERV 13 filter is worth keeping in stock.

Newfoundland and Labrador climate, homes & HVAC systems

The Island has a cool, wet maritime climate – mild by Canadian standards in winter, but windy, stormy and slow to warm in spring, with short, cool summers. Labrador is a different world: a subarctic climate with long, very cold winters, deep snow and short summers. Heating season runs much of the year in both, and in Labrador the furnace may barely rest from October to May.

Electric baseboard heat has long been common in Newfoundland, but more and more homeowners are adding ductless and ducted heat pumps, and many houses still use oil furnaces, oil-fired boilers or wood. Newer, tightly built homes rely on HRVs for fresh air, which makes clean HRV filters especially important in a damp climate. In Labrador, oil and electric forced-air furnaces are widespread. Whatever the system, if air passes through a duct, it should pass through a clean filter first.

Recommended for Newfoundland and Labrador

MERV 11 for damp-climate homes, MERV 13 for smoke

MERV 11 captures mould spores, dust-mite allergens and pet dander, which is what most Newfoundland and Labrador homes need. Use MERV 13 during wildfire season or for anyone with asthma, and MERV 8 on older furnaces with weaker blowers.

Shop MERV 11 →   Shop MERV 13 →

Seasonal filter tips for Newfoundland and Labrador

  • Spring: Change your filter after the long wet thaw, when damp basements release the most mould spores.
  • Summer: Keep a spare MERV 13 for wildfire smoke, especially in Labrador and central Newfoundland.
  • Fall: Fit a fresh filter before the heating season and clean HRV screens before winter storms.
  • Winter: Check monthly – longer and more often in Labrador, where furnaces run almost non-stop.

Which MERV rating is right for your Newfoundland and Labrador home?

MERV (Minimum Efficiency Reporting Value) measures how well a filter captures particles of different sizes under the ASHRAE 52.2 test standard. Higher numbers catch smaller particles. Most residential furnaces in Canada run well on MERV 8 to MERV 13 – here is how to choose:

Rating What it captures Best for
MERV 8 Dust, lint, pollen, mould spores and larger particles (3–10 microns) Budget-friendly everyday protection, rental units, new-build dust
MERV 11 Everything MERV 8 does plus pet dander, fine dust and some smoke (1–3 microns) Most family homes, pets, seasonal allergies
MERV 13 Fine particles down to 0.3–1 micron, including much of the PM2.5 in wildfire smoke Asthma, allergies, wildfire smoke, newborns and seniors

Not sure? Read our complete MERV rating guide. If you are moving up to MERV 13 on an older furnace, a deeper 2-inch or 4-inch filter keeps airflow healthy.

Popular furnace filter sizes in Newfoundland and Labrador

These sizes fit most furnaces and air handlers in the province. HRVs and older oil furnaces often take unusual sizes – browse our special sizes or order a custom filter.

How to measure: the size printed on the filter frame (e.g. 16x25x1) is the nominal size; the real filter is usually about ½" smaller (15½ x 24½ x ¾). Order by the printed size, or measure your old filter and use our size search. Odd size? We build special and custom sizes to order.

How often to change your furnace filter in Newfoundland and Labrador

Filter depth Typical home Pets, allergies or smoke
1-inch Every 1–3 months Every 30–45 days
2-inch Every 3–4 months Every 2 months
4-inch Every 6–9 months Every 4–6 months
5-inch Every 9–12 months Every 6 months

In this damp climate, check filters monthly in spring and fall, and replace them sooner if the house has had any water in the basement or crawl space. See the full filter changing guide.

Dirty used furnace filter beside a new clean pleated filter
A clogged filter (left) restricts airflow and makes your furnace work harder.

Air filters for Newfoundland and Labrador businesses & property managers

Hospitals and long-term care homes, Memorial University and College of the North Atlantic campuses, schools, fish plants, mines, offshore-industry offices and hotels across Newfoundland and Labrador all run ventilation systems that depend on reliable filters. Remote sites in particular benefit from ordering a full season's supply at once.

We supply contractors, facility managers and property owners province-wide with pleated, pocket, rigid cell, wire panel and HEPA filters. Open a business account for volume pricing and planned deliveries.

Shipping & delivery to Newfoundland and Labrador

Orders to Newfoundland and Labrador ship for $45 flat rate. Most orders arrive in 3–9 business days, with no customs or duties because everything ships from within Canada.

Standard sizes are usually made and shipped within 1–2 weeks; custom sizes can take up to 3 weeks. Prefer to collect? Free pickup is available Monday to Friday, 7:00 AM – 4:30 PM at 15 Melanie Drive, Brampton. Full details are on our shipping & returns page.

Why Newfoundland and Labrador customers choose Canadian Air Filters

Canadian Air Filters production floor in Brampton, Ontario
Made in BramptonWe manufacture our filters in Ontario – not a reseller shipping from overseas.
Tested ratingsMERV ratings based on ASHRAE 52.2 testing, so you get the filtration you pay for.
Any sizeOver 1,800 filters online in standard and special sizes, plus custom sizes made to order.
Real peopleQuestions? Call 905-867-3667 or email info@canadianairfilters.com.

Cities and towns we serve in Newfoundland and Labrador

Areas we deliver to across Newfoundland and Labrador

St. John's · Mount Pearl · Conception Bay South · Paradise · Torbay · Bay Roberts · Carbonear · Clarenville · Gander · Grand Falls-Windsor · Deer Lake · Corner Brook · Stephenville · Marystown · Happy Valley-Goose Bay · Labrador City · Wabush · Churchill Falls

Nearby location pages: Ontario, Quebec, British Columbia, Alberta, Manitoba, Nova Scotia, Saskatchewan, New Brunswick, Prince Edward Island, Yukon, Northwest Territories & Nunavut. Or see all locations we deliver to.

Newfoundland and Labrador air filter FAQ

What MERV rating is best for Newfoundland and Labrador homes?

MERV 11 is a strong choice for the province's mould, dust and dander. Use MERV 13 during wildfire smoke or if someone has asthma, as long as your system is rated for it.

My house has electric baseboards. Do I need filters?

Baseboards don't use filters, but if you have an HRV, a ducted heat pump or an air handler, those do. HRV filters and cores should be cleaned or replaced regularly, especially in a damp climate.

How do I deal with a musty basement?

Find and fix the moisture source, run a dehumidifier, and keep a clean MERV 11 filter in your system to capture airborne spores. A carbon pleated filter can help with lingering odours.

Does Labrador get wildfire smoke?

Yes. Labrador has seen major wildfires and community evacuations in recent summers. Keep a spare MERV 13 filter and see our wildfire smoke guide.

How often should I change my filter in Labrador?

With furnaces running from fall to late spring, check 1-inch filters monthly and replace every 1–2 months. Deeper 4-inch filters typically last 4–6 months.

Should I stock up if I live in a remote community?

It's a good idea. Order a season's worth of filters at once so you always have a spare, and keep a MERV 13 on hand for smoke season.

How much does shipping to Newfoundland and Labrador cost?

Orders to Newfoundland and Labrador ship for $45 flat rate. Most orders arrive in 3–9 business days, with no customs or duties because everything ships from within Canada.

Can you make custom-size filters for my Newfoundland and Labrador home or building?

Yes. Because we manufacture in Brampton, we can build non-standard and custom sizes to order – usually within about 3 weeks. Use our custom filter form or email info@canadianairfilters.com with your dimensions and MERV rating.

Helpful air quality guides

Ready to breathe better in Newfoundland and Labrador?

Made in Brampton · $45 flat rate · standard & custom sizes.