15 min read · Filters 101
What is MERV?
MERV stands for Minimum Efficiency Reporting Value. It comes from ASHRAE Standard 52.2, the North American lab test for HVAC air filters. A filter is tested against particles in three size ranges and gets a rating from 1 to 16 based on the lowest efficiency it reaches as it loads with dust.
- E1: 0.3–1 micron (smoke, bacteria, the finest PM2.5)
- E2: 1–3 microns (fine dust, pet dander, mould spores)
- E3: 3–10 microns (pollen, dust mites, lint)
The higher the MERV, the more small particles the filter captures. Older charts list MERV 17–20, but those were removed from the standard in 2017; HEPA filters are now rated under their own tests.
Quick recommendation
| Rating | Best for |
|---|---|
| MERV 8 | Most homes with no allergies or pets – good everyday protection for people and equipment |
| MERV 11 | Pet owners, mild allergies, dusty homes, city living |
| MERV 13 | Asthma or strong allergies, wildfire smoke, multiple pets, long-term care and schools |
What each MERV level captures
Minimum average efficiencies under ASHRAE 52.2-2017:
| MERV | Fine (0.3–1 µm) | Medium (1–3 µm) | Large (3–10 µm) | Typical use |
|---|---|---|---|---|
| 1–4 | – | – | under 20% | Fibreglass throwaways, equipment protection only |
| 5–7 | – | – | 20–50%+ | Basic pleated, pre-filters |
| 8 | – | some | 70%+ | Standard residential and commercial |
| 9–10 | – | up to 50%+ | 75–85%+ | Better residential |
| 11 | some | 65%+ | 85%+ | Allergies, pets |
| 12 | some | 80%+ | 90%+ | Offices, schools |
| 13 | 50%+ | 85%+ | 90%+ | Wildfire smoke, asthma, healthcare, LTC |
| 14 | 75%+ | 90%+ | 95%+ | Hospitals, labs (commercial systems) |
| 15–16 | 85–95%+ | 95%+ | 95%+ | Surgical and critical areas |
MERV vs MPR vs FPR
Some big-box brands use their own scales. These are rough equivalents only – MERV is the independent industry standard, so compare on MERV whenever you can.
- MERV 8 ≈ MPR 600 ≈ FPR 5
- MERV 11 ≈ MPR 1000–1200 ≈ FPR 7
- MERV 13 ≈ MPR 1500–1900 ≈ FPR 9–10
MPR is 3M's scale and FPR is Home Depot's.
Canadian considerations
- Wildfire season (May–October): smoke from Western and Northern fires reaches most provinces. Use MERV 13 during smoke events. See our Wildfire Smoke Survival Guide.
- Allergy season (April–September): trees in spring, grass in summer, ragweed in late summer. MERV 11 or higher helps.
- Heating season (October–April): windows are shut and your furnace runs constantly, so your filter does more work. Check it monthly.
- Cities: traffic adds fine particles in Toronto, Montreal and Vancouver. MERV 11–13 is a good fit.
Will a higher MERV hurt my furnace?
Higher MERV filters have denser media, which can add airflow resistance. In practice most modern furnaces handle MERV 11–13 without trouble, especially when you:
- Go deeper: a 4" filter has far more media than a 1" filter at the same MERV, so it breathes easier and lasts longer.
- Change it on time: a clogged MERV 8 restricts more air than a clean MERV 13.
- Watch for warning signs: weak airflow at vents, whistling, or rooms that won't heat. If you notice these, drop one rating or call an HVAC technician.
Beyond MERV
Carbon pleated filters add activated carbon to capture odours from cooking, pets and smoke smell, which particle filters alone don't remove. HEPA filters capture 99.97% of 0.3-micron particles but are too restrictive for most home furnaces – pair a MERV 13 furnace filter with a portable HEPA purifier for bedrooms.
Made in Brampton, Ontario. Shop MERV 8, MERV 11 and MERV 13 filters, order custom sizes, or request a bulk quote for your building.