Air Filters Calgary
Furnace and commercial HVAC filters for Calgary homes, infills, condos and businesses – manufactured in Canada and shipped to every quadrant of the city.
- ✓ Made in Canada
- ✓ Custom sizes
- ✓ MERV 8 · 11 · 13
- ✓ No customs or duties

Air quality in Calgary
- Chinook winds & dust
- Very dry air
- Spring gravel dust
- Wildfire smoke
- New-community construction
- Deerfoot & ring road traffic
Calgary sits more than 1,000 metres above sea level where the prairie meets the foothills, and its weather is famously changeable. Chinook winds sweep down from the Rockies several times each winter, melting snow in hours and often bringing strong gusts that lift dust off bare ground, construction sites and dry roads. The air is very dry most of the year, which keeps fine particles suspended indoors and makes the filter in your furnace work harder than many people realise.
Spring is dust season. Months of gravel spread on Deerfoot Trail, Crowchild, Glenmore and residential streets break down into grit once the snow melts, and it lingers until street sweeping catches up. Calgary also grows outward faster than almost any Canadian city, so new communities in the far north, south-east and west – places like Seton, Cornerstone and the Rockland Park area – mean active building sites and dirt roads for years at a time. Traffic on Stoney Trail and the major freeways adds steady exhaust.
In summer, the main concern is wildfire smoke. Smoke from fires in BC, northern Alberta and the mountain parks has settled over the city in several recent summers, sometimes for a week or more, turning the downtown skyline orange. Tree pollen in spring and grass pollen in early summer round out the list. For most households, a pleated MERV 11 filter handles everyday dust, with MERV 13 kept ready for smoke.
Calgary climate, homes & HVAC systems
Calgary's winters are long and cold, but broken up by chinooks that can push the temperature above freezing in mid-January. Heating season typically runs from late September to May, and snow can fall in almost any month. Summers are sunny and warm with cool nights, and while many older homes never had air conditioning, central AC is now standard in most new builds. The furnace fan – and the filter – does most of its work during the long heating season.
Housing ranges from 1950s and 60s bungalows in communities like Haysboro, Mayland Heights and Thorncliffe, many now being replaced by modern infills, to the 1980s and 90s two-storeys of Edgemont, Shawnessy and Sundance, and the newer suburbs that ring the city. Older homes often run mid-efficiency furnaces with 1-inch filters; most homes built since the 2000s have high-efficiency furnaces with 4- or 5-inch media cabinets, an HRV and a humidifier. Downtown and Beltline condos commonly use fan coils or in-suite heat pumps.
MERV 11 for chinook dust and dry air, MERV 13 for smoke days
MERV 11 traps the fine dust that chinooks and spring gravel stir up, along with pollen and pet dander, without starving your furnace of air. Switch to MERV 13 when smoke rolls in, or year-round if someone at home has asthma. Homes with a media cabinet can run MERV 13 in a 4-inch filter comfortably all year.
Shop MERV 11 → Shop MERV 13 →Seasonal filter tips for Calgary
- Spring: Change the filter once the snow is gone and road gravel dust has been swept up.
- Summer: Keep a MERV 13 on hand for wildfire smoke and close windows when the AQHI climbs.
- Fall: Fit a fresh filter in September – snow can arrive before the leaves finish falling.
- Winter: Check the filter monthly and after windy chinook stretches that blow dust indoors.
Which MERV rating is right for your Calgary home?
MERV (Minimum Efficiency Reporting Value) measures how well a filter captures particles of different sizes under the ASHRAE 52.2 test standard. Higher numbers catch smaller particles. Most residential furnaces in Canada run well on MERV 8 to MERV 13 – here is how to choose:
| Rating | What it captures | Best for |
|---|---|---|
| MERV 8 | Dust, lint, pollen, mould spores and larger particles (3–10 microns) | Budget-friendly everyday protection, rental units, new-build dust |
| MERV 11 | Everything MERV 8 does plus pet dander, fine dust and some smoke (1–3 microns) | Most family homes, pets, seasonal allergies |
| MERV 13 | Fine particles down to 0.3–1 micron, including much of the PM2.5 in wildfire smoke | Asthma, allergies, wildfire smoke, newborns and seniors |
Not sure? Read our complete MERV rating guide. If you are moving up to MERV 13 on an older furnace, a deeper 2-inch or 4-inch filter keeps airflow healthy.
Popular furnace filter sizes in Calgary
These are the most common furnace sizes in Calgary homes. Many houses built in the last 20 years take 4-inch or 5-inch filters – check the depth before ordering – and inner-city condos often need special sizes.
How often to change your furnace filter in Calgary
| Filter depth | Typical home | Pets, allergies or smoke |
|---|---|---|
| 1-inch | Every 1–3 months | Every 30–45 days |
| 2-inch | Every 3–4 months | Every 2 months |
| 4-inch | Every 6–9 months | Every 4–6 months |
| 5-inch | Every 9–12 months | Every 6 months |
In Calgary, check your filter after every long chinook wind and after smoke events, and change it sooner if you live beside a new-community building site. See the full filter changing guide.

Air filters for Calgary businesses & property managers
Calgary's downtown office towers, a growing number of office-to-residential conversions, the University of Calgary, Mount Royal University, SAIT, Foothills Medical Centre and other hospitals, seniors' residences, schools and the huge logistics and warehouse districts near the airport and in the south-east all run large HVAC systems. Energy company head offices, data centres and restaurants add to the list of buildings that depend on clean filters.
We supply property managers, facility teams and HVAC contractors across Calgary with pleated, pocket, rigid cell and V-bank filters in bulk, including sizes for older towers and retrofit air handlers. Open a business account for volume pricing and scheduled shipments on our bulk orders page.
- Pleated filters in 1", 2" and 4" depths, MERV 8–13
- Pocket (bag) filters, rigid cell and V-bank filters for rooftop units and air handlers
- Wire panel, HEPA, carbon and media pads & rolls
- Volume pricing, scheduled deliveries and NET terms for approved business accounts
Shipping & delivery to Calgary
Orders to Calgary ship for $35 flat rate. Most orders arrive in 3–9 business days, with no customs or duties because everything ships from within Canada.
Standard sizes are usually made and shipped within 1–2 weeks; custom sizes can take up to 3 weeks. Prefer to collect? Free pickup is available Monday to Friday, 7:00 AM – 4:30 PM at 15 Melanie Drive, Brampton. Full details are on our shipping & returns page.
Why Calgary customers choose Canadian Air Filters

Areas we deliver to in Calgary
Downtown · Beltline · Mission · Inglewood · Bridgeland · Kensington · Hillhurst · Marda Loop · Bowness · Varsity · Tuscany · Signal Hill · Forest Lawn · Panorama Hills · Evanston · Mahogany · Auburn Bay · Seton · Shawnessy · Saddle Ridge
Nearby location pages: Alberta, Edmonton. Or see all locations we deliver to.
Calgary air filter FAQ
What MERV rating do Calgary homes need?
MERV 11 is a great all-round choice for Calgary's dry, dusty air. Use MERV 13 during wildfire smoke or if someone at home has asthma or allergies, as long as your furnace is rated for it.
Do chinooks make my filter get dirty faster?
They can. Strong chinook winds carry dust and grit that find their way indoors, and big temperature swings make the furnace cycle more. Check your filter after long windy stretches.
My furnace takes a thick filter. Do you carry 4- and 5-inch sizes?
Yes. Many Calgary homes have media cabinets that take 4- or 5-inch filters, which typically last 6–12 months. Shop our 4-inch filters and 5-inch filters.
Does Calgary get wildfire smoke?
Yes. Smoke from fires in BC, northern Alberta and the mountain parks has drifted over Calgary in several recent summers. Keep a spare MERV 13 filter ready and see our wildfire smoke guide.
I live in a new community with construction all around. What should I do?
Use a MERV 11 or MERV 13 filter and check it monthly while building is under way nearby. New homes also shed drywall dust in their first year, so expect more frequent changes.
Will a better filter help with Calgary's dry winter air?
Filters don't add moisture, but they do capture the fine dust that dry air keeps suspended. Pair a clean filter with a well-maintained humidifier for the most comfortable winter air.
How much does shipping to Calgary cost?
Orders to Calgary ship for $35 flat rate. Most orders arrive in 3–9 business days, with no customs or duties because everything ships from within Canada.
Can you make custom-size filters for my Calgary home or building?
Yes. Because we manufacture in Brampton, we can build non-standard and custom sizes to order – usually within about 3 weeks. Use our custom filter form or email info@canadianairfilters.com with your dimensions and MERV rating.
Helpful air quality guides
Ready to breathe better in Calgary?
Made in Brampton · $35 flat rate · standard & custom sizes.